You see a screen like this:
3. Select System Administration. Enter the administrator password, if necessary.
4. Select Printer Settings.
5. Select Paper Source Settings.
6. Select Paper Setup Display.
7. Select one of these options:
• Select On to display the media setup screen when paper is loaded.
• Select Off if you do not want the media setup screen displayed when paper is loaded.
Note: When this setting is off, AirPrint is unavailable.
8. Select Error Notice.
9. Select one of these options:
• Select On to display an error if the loaded paper size or paper type differs from the product
settings.
• Select Off if you do not want an error to display.
Note: This setting is turned off automatically if you set the Paper Setup Display setting to Off.
10. When you are finished, press the home button to exit.
76
To Next Page
Loading...
