18 | Using the optional Auto Take-Up Reel (SC-P8000/SC-P9000 only)
Note: Epson Doubleweight or Singleweight Matte paper should be wound forward.
The Sensor light shows the status of the Auto Take-Up Reel.
Sensor light status Description
On Ready to use
Flashing rapidly Operating
Flashing slowly Power-saving mode
Flashing very slowly The Auto Take-Up Reel has an error and stopped
working; check the installation and see the online
User’s Guide for additional solutions
Off Turned off
Winding forward
Winding backward
To Next Page
Loading...
