149
• If you are comparing the print result with the image on your computer screen, the colors may not
match. Since monitors and printers produce colors differently, printed colors and screen colors do not
always look the same.
• Make sure that the printer cover is closed. Do not open any printer covers during printing. This can
cause the print head to stop abruptly, resulting in uneven color.
• If you are printing with the White or Metallic Silver ink cartridges, remove and shake the ink cartridge,
reinstall the ink cartridge, and perform Ink Circulation from the Maintenance menu several times (SC-
S80600).
Parent topic: Solving Print Quality Problems
Related concepts
Print Head Maintenance
Related references
Media Setup Menu Settings
Maintenance Menu Settings
Consumables and Replacement Parts
Related tasks
Adjusting Heating and Drying During Printing
Image is not Positioned Correctly on the Media
If the printed image is not positioned correctly on your media, try these solutions:
• Make sure you loaded the media correctly and selected the correct margin and start positions for it on
the product control panel.
• Turn on the Media Skew Check and Media Size Check settings on the product control panel to
prevent your image from printing outside the printable area.
Parent topic: Solving Print Quality Problems
Related references
Printer Setup Menu Settings
Related tasks
Loading Media
Where to Get Help
Epson provides technical support and information on the installation, configuration, and operation of
professional printing products through the Epson Preferred Limited Warranty Plan. Dial (888) 377-6611,
To Next Page
Loading...
