58
7. Do one of the following:
• If you want the product to automatically perform feed adjustment and head alignment, select
Auto, press the OK button, and skip the remaining steps.
Note: This option is not available when Film, Canvas, Textile, or Paper/Others is selected for
the Media Type setting.
• If you want to manually perform feed adjustment and head alignment, select Manual, press the
OK button, and continue with the next step.
8. Do one of the following depending on the adjustment pattern that prints:
• If you see a pattern similar to the following, check the pattern for group A and B and identify the
pattern with the least amount of overlap or gap for each group. Press the up or down arrow button
to select the value for the pattern you identified from group A and press the OK button. Press the
up or down arrow button to select the value for the pattern you identified from group B and press
the OK button.
To Next Page
Loading...
