80
Setting Options Description
Other maintenance Ink Circulation
(SC-S80600 only)
The printer automatically circulates the
White and Metallic Silver ink to help
prevent sedimentation. However, when
printing multiple copies of a large print
job, you may notice a difference in
color in your printouts if the ink is
circulated in between copies. To avoid
this problem, select Ink Circulation
before printing.
Ink Refresh
(SC-S80600 only)
Select this option if your printouts have
an uneven tint.
Head Washing Select this option if the nozzles are still
clogged after performing all other print
head cleaning options. Cleaning
cartridges (not included) are required
to use this feature.
Pre-Storage Maint. Select this option if you plan to turn off
the printer and not use it for an
extended period of time; click the link
below to the pre-storage maintenance
section for more information.
Change Color Mode
(SC-S80600 only)
Select 10 Color (WH) to use White ink,
10 Color (MS) to use Metallic Silver
ink, or 9 Color if you plan on not using
either White or Metallic Silver ink for an
extended period of time; click the link
below to the change color mode
section for more information.
Grease Carriage Rod Lets you apply grease to the carriage
rod; click the link below to the carriage
rod grease section for more
information.
Parent topic: Using the Control Panel Menus
To Next Page
Loading...
