c
Important:
❏ Never touch any parts or circuit boards other
than those that need to be cleaned. Doing so
may cause the printer to malfunction or print
quality to decline.
❏ Always use new cleaning sticks. Re-using a
stick that has already been used may actually
apply dirt to the printer.
❏ Do not touch the tips of the cleaning sticks.
Sebum may stick to it reducing the cleaning
effect.
❏ Touch a metallic object before starting work to
discharge any static electricity.
❏ Do not wipe the caps with an organic solvent
such as alcohol. Doing so may damage the
print head.
❏ Do not move the print head by hand. Failure
to observe this precaution could damage the
printer.
❏ If paper is loaded in the printer, we
recommend removing it before starting work.
Wiping the Print Head
A
Select Maintenance - Cleaning the
Maintenance Parts - Wiping the Print Head.
The print head moves to the cleaning position.
B
Open the maintenance cover.
C
Use the cleaning stick to remove any ink, fluff,
or trash.
D
Close the maintenance cover.
E
Go to the rear of the printer.
F
Open the port cover.
G
Open the rear maintenance cover.
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Problem Solver
197
To Next Page
Loading...
