(3) Hold the cleaning stick so that it is vertical,
and wipe the guides of all of the suction
caps.
(4) If there is any fluff or dust in the caps,
remove it with the tip of the cleaning stick
or with tweezers.
G
Install the part shown in the illustration.
H
Close the printer cover.
I
Press OK on the control panel.
The print head returns to its original position.
Cleaning is performed automatically if the print
head is clogged.
The paper is wrinkled.
o
Are you using the printer at normal room
temperature?
Epson special media should be used at normal room
temperature (temperature: 15 to 25˚C, humidity: 40
to 60%). For information about paper such as thin
paper from other manufacturers that requires
special handling, see the documentation supplied
with the paper.
o
When using non-Epson special media, have
you made the paper configuration?
When using non-Epson special media, configure the
paper characteristics (custom paper) before
printing.
U “Before Printing on Commercially Available
Paper” on page 231
Print outs are wrinkled
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Problem Solver
201
To Next Page
Loading...
