E
Select Printer Settings from the list, and then
check the print paper settings.
When Auto is selected for Roll Switching when
the printer driver is opened, the paper type and
width for the roll paper currently being used by
the printer are selected. When performing
printing, the roll paper to be printed is switched
according to the Auto setting from the printer's
General Settings - Printer Settings - Paper
Source Settings - Roll Paper Setup - Roll
Switching menu.
U āAutomatically Switch Roll Paper for
Printing (Except for the SC-P6500E Series/SC-
T3700E Series)ā on page 91
If the displayed content is not what you want,
change the printer paper to the paper you want
to use, and then click the Acquire Info button.
The printer information is reacquired and the
settings are updated.
F
Select the intended use of the printed material.
Choose an option according to the type of
document and how it will be used.
To set the color correction method or color
adjustments in detail to match your
preferences, select Advanced Settings as the
Mode Settings.
G
Check the content of the settings.
The settings are reflected in the illustration on
the right, so check this to make sure everything
is correct.
H
When settings are complete, click Print.
The printer icon is displayed in the Dock while
printing. Click the printer icon to display the status.
You can check the progress of the current print job
and the printer status information. You can also cancel
a print job.
Also, if an error occurs while printing, a notification
message is displayed.
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Basic Operations
74
To Next Page
Loading...
