Item Setting/Additional Explanation
Display order You can set the display order.
Basic Settings
Paper Source Roll(Auto), Roll 1, Roll 2, Cut Sheet, Poster Board
Color Mode Black/White, Color
Advanced
Print Quality Draft, Speed, Fine, High Quality, Max Quality
Page Margins option Clip By Margins, Oversize, Borderless
Bidirectional On, Off
Select Target Poster(Photo)/Perspective (SC-P Series only), Poster/Document (SC-T Series
only), GIS, CAD/Line Drawing, Off (No Color Management)
CMYK Simulation You can select the CMYK ink color you want to simulate when reproducing
CMYK ink colors for an offset printer. Displayed when the Adobe PS3
expansion unit is enabled.
RGB Source When printing RGB data, you can select the RGB color definition you want
to simulate. Displayed when the Adobe PS3 expansion unit is enabled.
Rendering Intent You can select how to convert the color space when performing absolute
colorimetric, relative colorimetric, perceptual, saturation CMYK simulation,
and RGM simulation.
Displayed when the Adobe PS3 Expansion Unit is enabled.
Target Contents Standard, GIS, Line Drawing
Displayed when the Adobe PS3 Expansion Unit is enabled.
Reduce/Enlarge You can select the ratio from Auto Fit Page, Custom Size, Actual Size, or
Specified Size.
File Storing You can set the storage space in which to save data printed from a
memory device. This is available when the optional SSD Unit is connected.
TIFF
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Menu List
168
To Next Page
Loading...
Need help?
General