B
Ink spatters on the base of the print head can be
removed using an extremely small amount of ink
cleaner applied to a clean room wiper (available
in the market).
SC-S70600 series/SC-S50600 series
The print head on the left is Head 1, the print
head on the right Head 2.
SC-S30600 series
c
Important:
❏ Be sure not to touch the nozzle surface
during cleaning. Failure to observe this
precaution could damage the print head.
❏ The parts shown below are sensors. Be
careful not to touch this area with your
hands or clean room wiper. Failure to
observe this precaution could affect print
quality.
Cleaning Wiper and Caps
The SC-S70600 series and SC-S50600 series have two
wipers and ten caps.
A
Clean the front and back of the wiper with a
cleaning stick.
If the attachment points do not require cleaning,
clean the wiper as shown below and proceed to
Step 7.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
82
To Next Page
Loading...
