F
Return the wiper when cleaning is complete.
Place on the attachment point and press down
until you hear a click.
If the remaining wiper for the SC-S70600 series
or SC-S50600 series is stained, repeat the process
from Step 1.
G
Clean the edges of the wiper with a cleaning stick.
The SC-S70600 series and SC-S50600 series have
ten caps, the SC-S30600 series four.
c
Important:
Do not touch the insides of the caps. Failure to
observe this precaution could deform the
affected parts.
Cleaning the Wiper Rail
c
Important:
Neglecting to clean the wiper rail can impair the
performance of the wiper, causing product
malfunction.
A
Press Z in the control panel and confirm that
the wiper has moved to the back.
B
Remove the wiper cleaner.
Grasp the cleaner as shown and lift it from the
printer.
C
Dampen a cleaning stick with consumable ink
cleaner.
U “Using Ink Cleaner” on page 80
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
84
To Next Page
Loading...
