Epson SureColor SC-T7700D - Using the Print Functions; Related Information

Accessing Web Cong
Enter the printer’s IP address into a web browser. JavaScript must be enabled. When accessing Web Cong via
HTTPS, a warning message will appear in the browser since a self-signed certicate, stored in the printer, is used
but there is no problem.
❏ Accessing via HTTPS
IPv4: https://<printer IP address> (without the < >)
IPv6: https://[printer IP address]/ (with the [ ])
❏ Accessing via HTTP
IPv4: http://<printer IP address> (without the < >)
IPv6: http://[printer IP address]/ (with the [ ])
Examples
❏ IPv4:
https://192.0.2.111/
http://192.0.2.111/
❏ IPv6:
https://[2001:db8::1000:1]/
http://[2001:db8::1000:1]/
Note:
If the printer name is registered with the DNS server, you can use the printer name instead of the printer’s IP address.
c
Important:
e
initial value of the administrator user name is blank (nothing is entered), and the initial value of the
administrator password is the product serial number. Check the product serial number on the label on the printer.
We recommend that you change the initial password as soon as possible to prevent unauthorized access.
Related Information
& “SSL/TLS Communication with the Printer” on page 79
&
“About Digital
Certication
” on page 79
Using the Print Functions
Enable to use the print function through the network.
To use the printer on the network, you need to set the port for network connection on the computer as well as the
printer’s network connection.
❏ Server / client connection : Set the port on the server computer
For the server / client connection, explain how to set the port manually.
❏ Peer to peer connection : Set the port on each computer
For peer to peer connection, explain how to set the port automatically using the installer available from the
soware disc or Epson's website.
Administrator's Guide
Function Settings
24