Epson SureColor SC-T7700D - Making System Settings; Setting the Control Panel; Power Saving Settings During Inactivity

Items Explanation
Workgroup Name Enter the work group name of MS Network. Enter between 0 and 15 characters in
ASCII.
Making System Settings
Setting the Control Panel
Setup for the printer's control panel. You can set up as follows.
1. Access Web Cong and select the Device Management tab > Control Panel.
2.
Set up the following items as necessary.
❏ Language
Select the displayed language on the control panel.
❏ Panel Lock
If you select ON, the administrator password is required when you perform an operation that requires the
administrator's authority. If the administrator password is not set, the panel lock is disabled.
❏ Operation Timeout
If you select ON, when you log in as the administrator, you are automatically logged out and go to the
initial screen if there is no activity for a certain period of time.
You can set between 10 seconds and 240 minutes by the second.
Note:
You can also set up from the printer’s control panel.
❏ Language : Menu > General Settings > Basic Settings > Language
❏ Panel Lock : Menu > General Settings > System Administration > Security Settings > Admin Settings > Lock
Setting
❏ Operation Time Out : Menu > General Settings > Basic Settings > Operation Time Out (You can specify On or
O.)
3. Click OK.
Related Information
& “Accessing Web
Cong
” on page 24
& “Logging on to the Printer Using Web Cong” on page 48
Power Saving Settings During Inactivity
You can set up the time to shi to the power saving mode or to turn the power o when the printer’s control panel
is not operated for a certain period of time. Set the time depending on your usage environment.
1. Access Web Cong and select the Device Management tab > Power Saving.
Administrator's Guide
Function Settings
35