Epson SureColor T2170 - Cleaning the Auto Sheet Feeder

157
Cleaning the Auto Sheet Feeder
If ink smears on a printout when printing from the auto sheet feeder (especially on glossy paper), you
can clean the auto sheet feeder roller to remove excess ink.
Note: If ink smears when printing on glossy paper, we recommend printing individual cut sheets one at a
time instead of using the auto sheet feeder.
1. Load a few sheets of plain paper in the auto sheet feeder.
2. Press the home button, if necessary.
3. Select Settings > Maintenance > Paper Guide Cleaning.
You see a screen like this:
4. Select Start to clean the paper guide.
The paper is ejected.
5. Check the ejected paper to see if it is clean.
• If you see ink smears, press and hold Run Again. Repeat until there is no more ink on the ejected
paper.
• If there is no ink visible, select Done.
Parent topic: Adjusting Print Quality
Related tasks
Loading Paper in the Auto Sheet Feeder