214
Note: Do not remove the protective piece shown here.
7. Select OK.
The cutter moves into position and cuts off the protective piece. Remove the protective piece from
the printer.
8. Close the cutter cover.
Parent topic: Maintenance and Transportation
Related references
Optional Equipment and Replacement Parts (US/Canada)
Optional Equipment and Replacement Parts (Latin America)
Cleaning the Integrated Scanner
Carefully follow the steps here to clean the inside of the integrated scanner.
If the rollers or the scanner's glass surface are very dirty, use the optional cleaning kit.
Follow the instructions below when cleaning the scanner:
• Do not use volatile chemicals, such as alcohol or paint thinners.
• Do not apply excessive force to glass surfaces.
• Do not use brushes or hard objects; they may scratch the glass surface and affect scan quality.
• Do not spray liquids directly on the scanner or glass surfaces.
To Next Page
Loading...
