English
3
Control Panel (LEDs and Switches–Illustration D)
About Errors–LED Indications
Switches
POWER
Press the switch to turn the power on or off.
PAPER
Press the switch to feed paper. This switch releases the paper insertion waiting state and the paper is fed
to the print starting position.
CLEANING
When printing becomes faint, press and hold the switch for more than three seconds to start cleaning.
Note: Do not use the CLEANING switch unless there is a problem with print quality.
State POWER LED
On
Power is on.
Off Power is off.
Flashing
The printer is operating (cleaning, power-on and power-off operations, discarding
remaining data for printing), or when an error occurs. (See "About Errors" below.)
Note: Never open the printer cover or turn off the printer when the POWER LED is flashing.
State PAPER LED
On
Printer cover is open.
Off Printer is in the following states at the same time: the printer is not offline, the printer
cover is not open, and the printer is not performing any paper control operation.
Flashing Printer is performing any paper control operation, such as slip paper insertion waiting
state, paper feeding, paper ejection, feeding to the print starting position. Also may
indicate an error. (See "About Errors" below.)
State INK LED
On
Ink cartridge is not installed or it is time to replace the ink cartridge. Install a cartridge
or replace it with a new one. Also may indicate an error. (See "About Errors" below.)
Off Ink cartridge is installed and ink is adequate.
Flashing
Ink is low. Be prepared to replace the ink cartridge with a new one. Also may indicate
an error. (See "About Errors" below.)
State POWER PAPER INK Countermeasure
Unrecoverable
error
Flashing Flashing On Ask for repair and report LED indications.
Maintenance
request
Flashing Flashing Flashing Ask for repair and report LED indications.
Auto
recoverable
error
Flashing Flashing Off The temperature of the print head or motor is high. Wait until
the temperature returns to normal and the printer resumes
printing automatically.
To Next Page
Loading...
Need help?
General