Epson TM-m10

2 - TM-m10 and TM-m30 POS Receipt Printer
Parts
From left to right:
❏ USB Type A connector (TM-m30 only; for customer
display and Wireless LAN unit)
❏ Power connector
❏ USB Type B connector (for host device)
❏ Ethernet connector (depending on model)
❏ DK (Drawer kick) connector
What’s in the Box
❏ Printer
❏ User’s manual and setup guide
❏ Small thermal paper roll (for operational testing)
❏ AC adapter
❏ AC cable
❏ USB cable (depending on model)
❏ Locking wire saddle (depending on model)
❏ 58-mm roll paper guides (TM-m30)
Accessories
Printer Specifications
Printing
Print method: thermal line printing
Dot density: 203 dpi × 203 dpi
Print width: TM-m10:
2.07" (52.5 mm), 420 dots
TM-m30:
2.07" (52.5 mm), 420 dots
2.82" (72 mm), 576 dots
Characters per line: 58mm roll:
(standard) font A: 35, font B: 42, font C: 46
80mm roll (TM-m30):
font A: 48, font B: 57, font C: 64
Print direction: TM-m10: unidirectional w/friction feed
TM-m30: bidirectional w/friction feed
Print speed: TM-m10: 5.9"/sec. (150 mm/sec.) max.
TM-m30: 7.9"/sec. (200 mm/sec.)max.
Continuous paper feed speed:
TM-m10:
approx. 5.9"/sec. (150 mm/sec.)
TM-m30:
approx. 7.9"/sec. (200 mm/sec.)
Character sets: alphanumeric: 95 characters
international: 18 sets
extended graphics: 128 × 43 pages
(including a user-defined page)
Interfaces
USB model (TM-m10):
Built-in USB 2.0 Full-speed
Ethernet model: Built-in USB 2.0 Full-speed and Ethernet
10/100 Base-T/TX
Bluetooth
®
model: Built-in USB 2.0 Full-speed, Bluetooth
3.0 (EDR supported), and Ethernet
(TM-m30)
Wi-Fi model: Built-in USB 2.0 Full-speed,
802.11b/g/n (2.4 GHz), and Ethernet
1 Roll paper cover
2 Panel LED
3NFC tag
4 Cover open lever
5 Feed button
6 Power switch
7 Autocutter adjustment knob (TM-m10 only)
8 Status sheet button
Option Model Part number
External buzzer unit OT-BZ20 C32C890634