17
Chapter 1 Product Overview
Operation Panel
1 (POWER) LED
Lights when the product is turned on.
Flashes during printing and while ink is charging.
2 (ERROR) LED
Lights when an error occurs. (“Checking the Product Status” on page 20)
3LCD
Shows the status of consumables and the product. (“Checking the Product Status” on page 20)
LCD backlight brightness is adjustable. (“Adjusting LCD Backlight Brightness” on page 46)
4 Button 1 (Left) / Button 2 (Right)
Each button is assigned the corresponding function that appears at the bottom of the LCD. The function on
the lower left of the LCD is executed when Button 1 (left button) is pressed, while the function on the lower
right is executed when Button 2 (right button) is pressed.
To Next Page
Loading...
