Epson TM-S9000II-NW - Setup Procedures

34
Chapter 2 Setup
Setup
This chapter describes the product and peripheral device installation and setup procedures that need to be per-
formed before using the product.
Setup Flow
The information in this chapter follows the flow of product and its peripheral device setup as shown below.
3. Connecting a Power Supply (page 38)
4. Loading Roll Paper (page 39)
2. Connecting a Cash Drawer (page 36)
1. Product Installation (page 35)
5. Installing the Ink Cartridges (page 40)
6. Connecting to a Host (page 42)
7. Attaching the Connector Cover (page 45)
8. Adjusting LCD Backlight Brightness (page 46)
9. Checking the Nozzles by Test Printing on Cut Sheets (page 47)