Epson TM-S9000II-NW - Connecting a Power Supply

38
Chapter 2 Setup
Connecting a Power Supply
1
Insert the DC connector of the AC adapter firmly all the way into the DC-IN connector
of the product.
2
Insert the connector of the AC cable firmly all the way into the AC inlet of the AC
adapter.
3
Insert the power plug firmly all the way into an outlet with a ground.
4
Place the AC adapter with its label facing downward.
WARNING
• Use only the specified AC adapter. Not doing so may cause a fire or electric shock. (“Electrical
Specifications” on page 95)
• D
o not plug the AC cable into a power outlet whose voltage does not match the input voltage of
the AC adapter. Doing so can damage the product.
• If you discover an abnormality immediately turn off the product and unplug AC cable from the
power outlet.
• Use only the AC cable that comes with the product.