43
Chapter 2 Setup
Connecting to a Wireless LAN
1
Put the product in network mode using the interface selection switch on the rear.
2
Connect a LAN cable to your router or hub.
3
Connect the optional wireless LAN unit.
4
Turn on the product.
5
Press Button 1 and Button 2 at the same time for two seconds to display and check
the network settings of the product.
6
Start a browser on the host device and enter the IP address of the product to open
Web Config.
7
Modify the product's wireless network settings in Web Config.
8
Disconnect the LAN cable.
9
Restart the product.
The product is in the network mode by default.
Network
To Next Page
Loading...
