Epson TM-S9000II-NW - Advanced Product Use; Software Settings Configuration

48
Chapter 3 Advanced Product Use
Advanced Product Use
Software Settings
The product has memory switches and customize values as software setting functions, which can be used for
configuring various product settings.
The settings can be made by one of the methods described in the table below, by ESC/POS command, or by
Web API.
Setting item/setting methods
Software setting
mode
TM-S9000II Utility
Memory switch
Transmits the power ON information
✔✔
Auto line feed
✔✔
Remote wake-up
✔✔
Roll paper cover open during printing
✔✔
Customize value
Roll paper print density
✔✔
Paper autocutting after closing the roll paper cover
✔✔
Roll Paper Reduction
✔✔
Print density when multiple tone printing
✔✔
Sets time to check ink head cleaning
✔
Print Start Position
✔
Validation settings
✔
Cut sheet settings
✔
Time to enter power saving mode
✔
Function to prevent printing on the back side of docu-
ments (endorse) without magnetic ink characters
✔
MICR appearance judgment position using the func-
tion to prevent printing on the back side of docu-
ments (endorse) without magnetic ink characters
✔
R/E
Settings for auto Top Logo /
Bottom Logo printing
✔
Extended settings for auto Top Logo /
Bottom Logo printing
✔
• For information on the software setting mode, refer to “Software Setting Mode” on page 61.
• For details on the TM-S9000II Utility, refer to the TM-S9000II Utility User's Manual.
• For more information on the Web API, refer to the TM-S9000II-NW/TM-S2000II-NW Web API Ref-
erence Guide.