49
Chapter 3 Advanced Product Use
Function
Transmits the power ON information
• No send (default setting)
• Send
Auto line feed
• Always disabled (default setting)
• Always enabled
Remote wake-up
• Enabled (default setting)
• Disabled
Roll paper cover open during printing
• Automatic recovery error (default setting)
• Recoverable error
Roll paper print density
Selectable level 1 to 13 (70% to 130%)
Default setting: Level 7 (standard)
In order to ensure high print quality, setting the print density is recommended in accordance with the type of
paper being used as shown in the table below.
Paper autocutting after closing the roll paper cover
• Cut (default setting)
• No cut (not recommended)
Original paper type Density
AF50KS-E 4 (85%)
TF50KS-EY, P220AGB-1 5 (90%)
TF60KS-E, PD160R, PD190R, KT48FA, KT55FA, F5041(55), F5041(48) 7 (100%)
P30521, P30523, P31523, P35524 8 (105%)
The higher the print density, the lower the printing speed.
To Next Page
Loading...
