59
Chapter 3 Advanced Product Use
Printing on Cut Sheets
When test printing on cut sheets, use the included cut sheet paper or cut sheets with dimensions of at least
70 mm wide by 152 mm long.
1
Turn off the product and open the ink cartridge cover.
2
While holding down Button 1, press the (POWER) button to turn on the product.
3
Press Button 1 twice.
4
Close the ink cartridge cover.
This starts printing of NV graphics information.
Initialization starts after printing is complete. Next, the product transitions to its normal state (print-
ing/scanning enabled).
ON
+
To Next Page
Loading...
