Epson TM-S9000II-NW - Product Specifications; General Specifications

94
Appendix A Product Specifications
Product Specifications
General Specifications
Auto cutter Cutting method Scissors type with separated blades
Cutting type Partial cut (one point uncut on left end)
Number of ASF sheets No more than 100 sheets of check paper no thicker than 0.13 mm (ANSI
standard). However, total thickness should be no greater than 13 mm,
including paper floating
Pocket capacity One-pocket No more than 100 sheets of check paper no thicker than 0.13 mm (ANSI
standard). However, total thickness should be no greater than 13 mm,
including paper floating
MICR reader Magnetization
method
Permanent magnet
Supported fonts E13B, CMC7 (Alphabetic characters not supported.)
Recognition rate Recognition rate no less than 99% (ANSI standard check at 25°C)
False recognition rate no more than 0.1% (ANSI standard check at 25°C)
Supported OCR
characters
Supported fonts OCR-A
OCR-B (Support for %, /, and & characters can be implemented by the
driver)
Supported bar code font UPC-A, UPC-E, JAN13/EAN13, JAN8/EAN8, CODE39, ITF, CODE128
Interface Ethernet
Wi-Fi (available with the optional wireless LAN unit)
USB (“USB Interface Specifications” on page 100)