96
Appendix A Product Specifications
Network Interface Specifications
For both Ethernet interface and Wi-Fi interface
Support protocols
Network parameters
* They are the default values when IP address acquisition is set to "Manual".
Protocols Usage
IP, ARP, ICMP, UDP, TCP Basic communication protocols
LPR, TCP Socket Port Printing protocols
HTTP/HTTPS Used in ePOS-Print, Web Config, and Web API
SNMP, ENPC Used in setting and monitoring
DHCP, APIPA Used in automatic setting for the IP address and so on
• The automatic IP addresses setting is first done using DHPC, and when DHCP is disabled or fails,
APIPA is used.
• If the LAN cable is not connected for more than 40 seconds after the product is turned on, the IP
address will be automatically set again after the LAN cable is connected.
Item Initial settings
IP address 192.168.192.168
*
Subnet mask 255.255.255.0
*
Default gateway 0.0.0.0
*
APIPA Disabled
Printing IP address Enabled
Socket Timeout 300 seconds
Community name (Read only) public
Community name (Read/Write) None
SNMP IP Trap 1 Disabled
SNMP IP Trap 2 Disabled
Communication mode Auto negotiation
IP Filter Disabled
To Next Page
Loading...
