Epson TM-S9000II-NW - Page 97

97
Appendix A Product Specifications
Printing communication protocol
• LPR: Transfers printing data
• TCP Socket Port: Transfers printing data and product status via bidirectional direct socket communication.
LPR
• Max. simultaneous connections: 6
• Number of connections for which printing is available: 1 (occupied until the connection is released.)
• Time out: 300 seconds (changeable)
• Job cancel: Not available
• Banner printing: Not available
Socket communication
• Port type: TCP communication port for direct printing
• Port number: 9100
• Port communication direction: bidirectional
• Max. simultaneous connections: 6
• Number of connections for which printing is available: 1 (occupied until the connection is released.)
• Time out: 300 seconds (changeable)
For Ethernet interface
Communication specifications
10BASE-T/100BASE-TX/1000BASE-T
LED Status Indication
LED LED status Description
LED1
Lit yellow Connecting at one of the speeds
Blinking yellow Sending/receiving data
Off Not connected
LED2
Lit green Connecting using 1000BASE-T
Lit orange Connecting using 100BASE-TX
Off Connecting using 10BASE-T, or not connected
LED 1 LED 2