Epson TM-T20II-i - Registering Web Contents

68
• To access the Web contents registered in this product from an input terminal or other device, the
reference URL is different depending on the folder configuration of the zip file as shown below.
Registering Web Contents
To register a web content in this product, the following methods are available:
•Manual Update: Web contents are registered manually by using EPSON TMNet WebConfig.
•Automatic Update: Web contents are saved in the Web server and automatically updated by
the product referring to the files periodically.
Manual Update
1. Connect this product to a network
Connect this product to a network and turn on the product.
2. Start EPSON TMNet WebConfig
Access the address bar of the Web browser on the PC for setting to start EPSON TMNet WebConfig.
When SSL is disabled: http://[This product's IP address]/webconfig
When SSL is enabled: https://[This product's IP address]/webconfig
For detail, see
"Starting EPSON TMNet WebConfig" on page 92.
3. Register the Web contents
From [Update Settings] in the [Web Service Settings] menu, register the Web contents to this product.
Click [Browse...], specify the zip file to be registered, and then click [Upload].
For detail, see
"Web Service Settings - Web Contents - Update Settings" on page 100.
When SSL is disabled:
➀ http://[This product’s IP address]/index.html
➁ http://[This product’s IP address]/webpage/index.php
When SSL is enabled:
➀ https://[This product’s IP address]/index.html
➁ https://[This product’s IP address]/webpage/index.php
epsonsample.zip
webpage ............................ : A folder added
index.php
css
*.css
img
*.bmp
*.jpg
*.png
js
*.js
sample
*.html
epsonsample.zip
index.html
css
*.css
img
*.bmp
*.jpg
*.png
ssltrustedcerts
certificate001.pem
js
*.js
sample
*.html
➀
➁