Epson TM-T90 - DLE DC4 Fn M T (Fn = 1)

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
79 78
TM-T90
Specification
(STANDARD)
DLE DC4 fn m t (fn = 1)
[Name] Generate pulse in real-time
[Format] ASCII DLE DC4 fn m t
Hex 10 14 1 m t
Decimal 16 20 1 m t
[Range] fn = 1
0 ≤ m ≤ 8
1 ≤ t ≤ 8
[Description] • Outputs the pulse specified by t in real-time to the connector pin specified by m as follows:
m Connector pin
0 Drawer kick-out connector pin 2.
1 Drawer kick-out connector pin 5.
The pulse ON time or OFF time is set to [t × 100 ms].
[Notes] • If print data includes a character string containing this command, the printer performs the
command. Users must consider this.
For example: A bit image accidentally might include the same data string as this
command.
• Do not embed this command within another command.
For example: Bit image data might include this command.
• This command is ignored in the following states:
•
During transmission of block data.
•
During driving of drawer kick-out.
•
When an error has occurred.