Rev. A Setup 3-27
TM-U220II Technical Reference Guide
❏ Paper width setting
Press the FEED button the number of times required to select the desired roll paper width setting
(Customize value.)
Note:
See “Adjusting Roll paper width” (page 3-28) also to adjust roll paper width.
❏ Cover open status
Press the FEED button the number of times required to select the desired the mapping of cover
open status setting.
❏ USB power-saving function
You can select the setting of the USB power-saving function by pressing the FEED button
numerous times.
Press FEED button Selecting paper width
0 times: No change
1 time: 76 mm
2 times: 69.5 mm
3 times: 57.5 mm
4 or more times: No change
Press FEED button Setting selected
0 times: No change
1 time: Paper out (Msw 8-8: OFF)
2 times: Cover open (Msw 8-8: ON)
3 or more times: No change
Press FEED button Setting selected
0 times: No change
1 time: Enabled
2 times: Disabled
3 or more times: No change
To Next Page
Loading...
