Epson TM-U220II - Page 97

Rev. A Comparison table for TM-220II/TM-U220/U210/U300 A-3
TM-U220II Technical Reference Guide
TM-U300 (Type A, B, C, D) TM-U210 (Type A, B, D) TM-220II/TM-U220 (Type A, B, D)
Take up unit Auto-take up (type A, C) Auto-take up (type A) <==
Autocutter (type A/B) Full cut / partial cut;
selectable by command
Partial cut (one point left
uncut at center position)
TM-U220II : Partial cut
TM-U220 : Partial cut or full cut (optional
factory setting)
(Partial cut: one point left uncut at right
position.)
Print area A/C position to print start position 36mm 27mm <==
Manual cut position to print start
position
26mm (type A, B)
28mm (type C, D)
20.2mm 34.9mm (Type A, B)
22.1mm (Type D)
Print width 63.5mm (200dots, 400
position)
63.34mm (200dots, 400
position)
76: 63.34mm(200dots,400position), 69.5:
57mm(180,360), 57.5:47.5mm(150,300)
Left margin (6mm) (5.9mm) 76: 6.8mm, 69.5: 6.7mm, 57.5: 4.2mm
Right margin Approx. 6.5mm (6.76mm) 76: 5.8mm, 69.5: 5.8mm, 57.5: 5.8mm
Internal buffer Receive
buffer
ANK model 1KB / 40 bytes: selectable 1KB / 40 bytes: selectable TM-U220II : 20K bytes/40 bytes; selectable
TM-U220 : 4K bytes/40 bytes; selectable
Multi-language
model
512 bytes / 40 bytes;
selectable
512 bytes / 40 bytes;
selectable
TM-U220II : 20K bytes*/40 bytes;
selectable
TM-U220 : 4K bytes/40 bytes; selectable
*May be 4K bytes depending on the
model.
NV bit
image
ANK model No No 128 KB
Multi-language
model
No No 128 KB
User NV
memory
ANK model No No 8 KB
Multi-language
model
No No 8 KB