26
B Assemble the parts
1. Assemble the wall plate.
Assemble the three plates into one unit, and secure them with the M4 x 12 mm hexagon socket head
cap bolts (x6) supplied.
2. Attach the slide plate to the projector.
Attach the slide plate to the projector using the M4 x 12 mm hexagon socket head cap bolts (x4)
supplied.
3. Extend the mount arm to see the stamps that indicate the two positions for mounting the adjustment
unit.
M4 x 12 mm hexagon socket head cap bolts
Spring washer
Washer
M4 x 12 mm hexagon socket head cap
bolts
Spring washer
Washer
Slide plate
To Next Page
Loading...
