40
3. After you finish making all of the adjustments in steps E to J, tighten the screw you loosened in
.
H Adjust the horizontal slide
1. Loosen the M4 x 12 mm hexagon socket head cap bolts (x2), and then adjust the slider for the slide
plate.
2. After you finish making all of the adjustments in steps
E to J, tighten the M4 x 12 mm hexagon
socket head cap bolts (x2).
I Adjust the forward/backward slide
1. Loosen the M4 x 12 mm hexagon socket head cap bolts (x2), and then adjust the slider for the wall
mount.
2. After you finish making all of the adjustments in steps
E to J, tighten the M4 x 12 mm hexagon
socket head cap bolts (x2).
M4 x 12 mm hexagon socket
head cap bolts (x2)
M4 x 12 mm hexagon socket
head cap bolts (x2)
To Next Page
Loading...
