169
3. Select the Reset menu and press Enter.
4. Select Reset Lamp Hours and press Enter.
You see a prompt asking if you want to reset the lamp hours.
5. Select Yes and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Projector Lamp Maintenance
Related tasks
Replacing the Lamp
Replacing the Remote Control Batteries
The projector remote control uses two AA manganese or alkaline batteries. Replace the batteries as
soon as they run out. The Epson 880X includes a second remote control for Android TV that uses two
AAA manganese or alkaline batteries.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
To Next Page
Loading...
