& “Setting Receive Mode” on page 159
& “Menu Options for Fax Settings” on page 192
Making Basic Fax Settings Individually
You can make fax settings without using the fax setting wizard by selecting each setting menu individually. e
settings
congured
using the wizard can also be changed. For more details, see the list of menus in fax settings.
Related Information
&
“Menu Options for Fax Settings” on page 192
Making Settings for a PBX Phone System
Make the following settings when using the printer in oces that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
1. Select Settings on the home screen.
2. Select General Settings > Fax Settings > Basic Settings.
3. Select Line Type, and then select PBX.
4.
When sending a fax to an outside fax number using # (hash) instead of the actual external access code, select
the Access Code box, and then select Use.
e # entered instead of the actual access code, is replaced with the stored access code when dialing. Using #
helps avoid connection problems when connecting to an outside line.
Note:
You cannot send faxes to recipients in Contacts in which an external access code such as 0 or 9 is set.
If you have registered recipients in Contacts using an external access code such as 0 or 9, set the Access Code to Do Not
Use. Otherwise, you must change the code to # in Contacts.
5. Tap the Access Code input box, enter the external access code used for your phone system, and then tap OK.
e access code is stored in the printer.
Making Paper Source Settings to Receive Faxes (For Models with Two or More Paper Sources)
You can set the printer so that specic paper sources are not used for printing received documents and fax reports.
By default, all of the paper sources are enabled for fax printing. Use this feature if you do not want to use paper in a
specic paper source for fax printing.
1. Select Settings on the home screen.
2. Select General Settings > Printer Settings > Paper Source Settings > Auto Select Settings > Fax.
3.
Tap each box of the paper source that you do not want to use for printing faxes.
e paper source setting is changed to O and is disabled for printing faxes.
User's Guide
Faxing
148
To Next Page
Loading...
Need help?
General
Weight and Dimensions
