250
You see this screen:
5. Select Fax Setting Wizard.
6. Make sure a phone line is connected and select Proceed.
7. Use the on-screen keyboard to enter the sender name for your fax source, such as your name or a
business name. You can enter up to 40 characters. Select OK.
8. Use the on-screen keyboard to enter your fax number, up to 20 characters and select OK.
Note: The name and phone number you enter appears in the fax header on the faxes you send.
9. On the Distinctive Ring Setting screen, do one of the following:
• If you have subscribed to a distinctive ring service from your telephone company, select Proceed.
Select the ring pattern to use for incoming faxes. Go to step 12.
• If you do not have a distinctive ring service, select Skip and go to the next step.
Note: Distinctive ring services allows you to have several phone numbers on one phone line. Each
number is assigned a different ring pattern. You can use one number for voice calls and another for
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
