340
You see a screen like this:
7. Select Start to clean the print head.
When the cleaning cycle is finished, you see a message on the LCD screen.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
8. Select Yes to print a nozzle check pattern.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges
may be old or damaged and needs to be replaced.
Parent topic: Print Head Maintenance
Related tasks
Checking the Nozzles Using the Product Control Panel
Related topics
Loading Paper
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
