Epson WF-C5790 Series - Page 149

Related Information
& “Receiving Faxes by Polling (Polling Receive)” on page 149
& “Receiving Faxes from a Board with a Subaddress (SEP) and Password (PWD) (Polling Receive)” on page 150
Receiving Faxes by Polling (Polling Receive)
You can receive a fax stored on another fax machine by dialing the fax number. Use this feature to receive a
document from a fax information service.
Note:
❏ If the fax information service has an audio guidance feature that you need to follow to receive a document, you cannot
use this feature.
❏ To receive a document from a fax information service that uses audio guidance, just dial the fax number using the On
Hook feature or the connected telephone, and operate the phone and the printer following the audio guidance.
1. Select Fax on the home screen.
2.
Tap
(More).
3. Select Extended Fax.
4. Tap the Polling Receive box to set this to On.
5. Tap Close, and then tap Close again.
6. Enter the fax number.
Note:
If you cannot manually enter a fax number, Direct Dialing Restrictions in Security Settings is set to On. Select fax
recipients from the contacts list or the sent fax history.
7. Tap x .
Related Information
& “Sending Faxes Dialing from the External Phone Device” on page 137
& “Receiving Faxes
Aer Conrming
the Sender's Status” on page 149
& “More” on page 146
Receiving Faxes After Conrming the Sender's Status
You can receive a fax while listening to sounds or voices through the printer's speaker while dialing,
communicating, and transmitting. You can use this feature when you want to receive a fax from a fax polling
service by following an audio guide.
1. Select Fax on the home screen.
2.
Tap
and then specify the sender.
Note:
You can adjust the sound volume of the speaker.
User's Guide
Faxing
149