Epson WF-R8590 Series - Introduction; Setup Procedure

Introduction
Epson Open Platform unlocks the potential of Epson business Multi-Function Devices (MFDs), enabling them to be
integrated into server solutions providing customized user interface and control usage of the device based on user
authentication.
This guide explains how to set up the Epson Open Platform on a compatible device.
Setup procedure
Follow these steps to configure Epson Open Platform. Contact your dealer to acquire the firmware or product key.
Procedure Operations Location Time
1 Before starting Check that the printer is compatible with
Epson Open Platform
OP label 30 min.
Download the Epson Open Platform firmware
for the target model
https://openplatform.epson.biz/
download/op/
Acquire the product key activation code from
the serial number for the MFD
https://openplatform.epson.biz/
license-op/
inputInformation.html
2 Setting up Epson Open
Platform
Update the MFD's firmware https://openplatform.epson.biz/
download/op/
15min.
Activate the Epson Open Platform with the
product key
Web Config
("http://<epson-device-IP>")
3Connecting the
authentication device
(optional)
Check the compatibility for the card reader
and cards
https://openplatform.epson.biz/
download/op/
5 min.
Connect the authentication device to the
printer
-
Check that the authentication device is
operating correctly
Web Config
("http://<epson-device-IP>")
Hardware Setup Guide
Introduction
5