21. Select the software to be installed, and then click Install.
22. Select whether to restart your computer and click Finish to exit the wizard.
The wireless configuration is complete.
Ad Hoc Settings for Windows
The procedure to set up Ad Hoc by computer depends on your OS, computer, and the manufacturer of
your wireless devices. For details, refer to the documentation of the wireless devices or contact the
manufacturer’s customer support. The following section describes setup for Windows XP or
Windows 7 standard settings.
Note:
Even if you have a wireless network connection, the printer and computer may not be able to
communicate in your environment when you make the Ad Hoc settings described in this section. Set up
an Ad Hoc connection only when you use direct wireless communication between the printer and
computer.
AL-M200 Series Wireless Network Setup Guide
Wireless Network Setup Guide 15
To Next Page
Loading...
