Epson WorkForce Pro WF-4830 Series - Monitoring a Remote Printer; Backing up the Settings

❏ PC Connection via USB
If the driver was installed on the computer
Connect the printer to the computer using a USB cable, and then conrm that the printer does not print
and scan.
If the driver was not installed on the computer
Windows:
Open the device manager and keep it, connect the printer to the computer using a USB cable, and then
conrm
that the device manager's display contents stays unchanged.
Mac OS:
Connect the printer to the computer using a USB cable, and then conrm that the printer is not listed if you
want to add the printer from Printers & Scanners.
Related Information
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 271
Monitoring a Remote Printer
Checking Information for a Remote Printer
You can check the following information of the operating printer from Status by using Web Cong.
❏ Product Status
Check the status, cloud service, product number, MAC address, etc.
❏ Network Status
Check the information of the network connection status, IP address, DNS server, etc.
❏ Usage Status
Check the rst day of printings, printed pages, printing count for each language, scanning count, etc.
❏ Hardware Status
Check the status of each function of the printer.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 271
Backing Up the Settings
You can export the setting value set from Web
Cong
to the
le.
You can use it for backing up the contacts, setting
values, replacing the printer, etc.
e exported le cannot be edited because it is exported as a binary le.
Export the settings
Export the setting for the printer.
Administrator Information > Managing the Printer > Backing Up the Settings
362