157
Resetting the Roller Counter on the LCD Screen
You must reset the roller counter after replacing the cassette rollers to clear the roller replacement
message and to keep track of roller usage correctly.
1. Press the home button, if necessary.
2. Select Settings > Maintenance > Pickup roller information.
3. Select Reset Counter.
4. Select the paper cassette in which you replaced the rollers, if necessary.
5. Select Yes.
6. Select Yes again to confirm the reset.
7. If you want to feed a sheet of paper to check the roller installation, select Yes. (Otherwise, select
No.)
8. If you selected Yes, you can select Run to perform a Paper Guide Cleaning cycle, or select Finish
to exit.
9. Press the home button to exit.
Related tasks
Replacing the Paper Feed Rollers
To Next Page
Loading...
