252
• Align the print head.
• Adjust the print quality in the product software.
• Clean the paper path.
• Clean the paper rollers.
• Do not press too hard on the original or the document cover when you are scanning originals on the
scanner glass.
• Clean the scanner glass.
• If you are copying from the ADF, place your originals on the scanner glass instead.
• Clean the ADF.
• Clean the originals.
Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that
extends beyond the base of the product in all directions.
Parent topic: Solving Print Quality Problems
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Related references
Paper Specifications
Compatible Epson Papers
Paper or Media Type Settings - Printing Software
Related tasks
Loading Paper in the Paper Cassettes and Rear Paper Tray
Selecting the Paper Settings for Each Source - Control Panel
Selecting Double-sided Printing Settings - Windows
Selecting Double-sided Printing Settings - Mac
Cleaning the Paper Guide
Aligning the Print Head Using the Product Control Panel
To Next Page
Loading...
