Sharing line with phone device
A
Connect a phone cable leading from a telephone
wall jack to the LINE port.
B
Remove the cap.
C
Connect a phone or answering machine to the
EXT. port.
Note:
See the PDF User’s Guide for other connection methods.
Checking the fax connection
You can check whether the product is ready to send or
receive faxes.
A
Load plain paper in the cassette.
& “Loading Paper into the Paper Cassette” on
page 6
Note:
If your product is equipped with two cassettes, load paper
in cassette 1. If you have changed the Paper Source setting
(Setup > Fax Settings > Receive Settings > Paper
Source), load paper in the cassette you specified.
B
Enter Setup mode from the Home menu.
C
Select Fax Settings.
D
Select Check Fax Connection.
E
Press one of the x buttons to print the report.
Note:
If an errors are reported, try the solutions in the report.
Basic Guide
Faxing
12
To Next Page
Loading...
