Epson XP-2150 Series - Colored Banding Appears at Intervals of Approximately 2.5 CM; Blurry Prints, Vertical Banding, or Misalignment

Colored Banding Appears at Intervals of Approximately 2.5 cm
❏ Select the appropriate paper type setting for the type of paper loaded in the printer.
❏ Align the print head.
❏ When printing on plain paper, print using a higher quality setting.
Related Information
& “List of Paper Type” on page 38
& “Aligning the Print Head” on page 93
Blurry Prints, Vertical Banding, or Misalignment
Align the print head.
Related Information
& “Aligning the Print Head” on page 93
Print Quality Does Not Improve Even After Aligning the Print Head
During bidirectional (or high speed) printing, the print head prints while moving in both directions, and vertical
lines may be misaligned. If print quality does not improve, disable the bidirectional (or high speed) setting.
Disabling this setting may slow down printing speed.
❏ Windows
Clear High Speed on the printer driver’s More Options tab.
Solving Problems > Printout Problems > Blurry Prints, Vertical Banding, or Misalignment
133