Epson XP-2150 Series - Temporarily Printing with Black Ink - Windows

Note:
❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏ e available period varies depending on the usage conditions.
Temporarily Printing with Black Ink - Windows
Do one of the following.
❏ When the following window is displayed, select Print in Black.
❏ When the following window is displayed, cancel printing. And then, printing again.
Note:
If you cannot cancel printing from the computer, cancel using the printer's control panel.
Follow the steps below when printing again.
1.
Access the printer driver window.
Replacing Ink Cartridges > Temporarily Printing with Black Ink > Temporarily Printing with Black Ink - Windows
88