❏ Mac OS X
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
select the printer. Click Options & Supplies > Options (or Driver). Select O as the High Speed Printing
setting.
Images or Photos are Printed in Unexpected Colors
Adjust the color and then print again. e automatic color correction feature uses the standard correction mode in
PhotoEnhance. Try another correction mode in PhotoEnhance by selecting an option other than Auto Correct as
the Scene Correction setting. If the problem continues, use any other color correction feature other than
PhotoEnhance.
Related Information
& “Adjusting the Print Color” on page 47
Banding Appears at Intervals of Approximately 2.5 cm
❏ Align the print head.
❏ Select the appropriate paper type setting for the type of paper loaded in the printer.
Related Information
& “Aligning the Print Head” on page 77
Copy Quality Is Poor
Check the following if uneven colors, smears, dots, or straight lines appear in the copied image.
❏ Clean the paper path.
❏ Clean the scanner glass.
❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner
glass. Uneven colors, smears, or dots may appear when the original or the document cover is pressed too hard.
❏ If a moiré (cross-hatch) pattern appears, change the reduce and enlarge setting or place the original at a slightly
dierent angle.
❏ When the paper is smeared, lower the copy density setting.
Related Information
& “Cleaning the Paper Path” on page 79
& “Cleaning the Scanner Glass” on page 79
& “Print Quality is Poor” on page 106
& “Menu Options for Copy Mode” on page 53
User's Guide
Solving Problems
107
To Next Page
Loading...
Need help?
General
