Epson XP-410 - Replace Cartridge Information; Ink Information

2013/12/18
Revision: 1 Page: 83
7.6 Replace cartridge information
Structure
Item
Byte (Hex)
Value (Hex)
Header
1
0E
Parameter counter
1
01
Parameter
1
Replace cartridge information
The parameter <change cartridge information> is one byte Binary code that indicates the information about ink cartridge. 00
means that any ink cartridge is changed.
Bit0： The 1
st
data of 0F field
Bit1： The 2
nd
data of 0F field
Bit2： The 3
rd
data of 0F field
Bit3： The 4
th
data of 0F field
Bit4： The 5
th
data of 0F field
Bit5： The 6
th
data of 0F field
If the plural ink cartridges are changed at the same time, the both bits set 1.
7.7 Ink information
Structure
Item
Byte (Hex)
Value (Hex)
Header
1
0F
Parameter total counter
1
0D
Parameter counter for 1 I/C
1
3
Parameter
3 per 1 I/C
Ink information
The ink information order is Black, Magenta, Yellow, Cyan.
Each ink cartridge information is consisted of m1, m2, m3.
Ink information
code
m1
Ink cartridge name
01h: "Black Ink Cartridge"
03h: "Cyan Ink Cartridge"
04h: "Magenta Ink Cartridge"
05h: "Yellow Ink Cartridge"
m2
Ink color
00H:Black
01H:Cyan
02H:Magenta
03H:Yellow
m3
Ink remain counter:00H-64H
no cartridge : ”n”
cartridge in : ”i”