Copying a Document or Photo 9
Copying a Document or Photo
Follow the steps in this section to position your originals correctly on the scanner glass and
make color or black-and-white copies.
1. Make sure paper is loaded in one of the paper cassettes (see page 4).
2. Open the document cover and place your original facedown on the scanner glass, with
the bottom against the front-right corner.
3. Close the cover gently so you don’t move the original.
4. Press if necessary, press l or r to select
Copy, then
press
OK. You see this screen:
5. Press
+ or – to select the number of copies you want
(up to 99).
6. Press l or r to select
Color or B&W (black-and-white)
copies.
7. Press u or d, select
Paper and Copy Settings, then
press
OK to view additional copy settings.
8. Press u or d to select a copy setting, then press l or r
to change the selected setting.
Note: To clear previously used copy settings,
press
y. For more information about copy settings,
see your online User’s Guide.
9. When you’re ready to copy, press x.
To cancel copying, press y
.
Note: When printing two-sided, if ink on the front of the paper smears, select a longer
Dry Time setting.
To Next Page
Loading...
