Placing Originals for Copying, Scanning, or Faxing 11
2. Slide out the edge guide.
3. Fan the originals, then tap them on a flat surface to even the edges.
4. Insert the originals face up, top edge first. The
ADF icon appears on the screen.
Note: If you’re using the Letter, 2-up Copy or A4, 2-up Copy layout, make sure the
originals are loaded as shown below.
5. Slide the edge guide against the originals, but not too tight.
XP850QG.book Page 11 Friday, July 6, 2012 4:36 PM
To Next Page
Loading...
